Care Recommendations - Wolf E Serie Guía De Uso Y Mantenimiento

Oven Operation
Oven Rack Position
The oven rack and oven pan can be placed in any of the
four positions labeled on the front face of the oven. Refer
to the illustration below.
Oven rack position
Clean
During Clean, the oven is heated to an extremely high
temperature to burn off food soil. Remove the oven rack,
oven pan and rack guides. They will discolor if left in during
Clean.
The duration of the Clean cycle can be adjusted for the
level of cooking residue. For light soil, the duration of the
cleaning cycle is 1.5 hours and 2 hours for heavy soil. The
complete cycle can take up to 5 hours including cool
down.
Setting Clean:
1 Touch Settings.
Select Clean and touch Enter.
2
3 Use the arrows to select the desired level of cleaning,
then touch Enter. The door locks automatically once
the cycle begins.
The unit starts 20 seconds after the last key touch. To
start the mode immediately, use the arrows to select Start
Operation, then touch Enter.
Setting Delayed Start Clean:
1 Touch Settings.
2 Select Clean and touch Enter.
Use the arrows to select the desired level of cleaning,
3
then touch Enter.
4 Select Set End and touch Enter.
5 Use the arrows to select desired switch-off time, then
touch Enter.
To cancel Clean mode at any time, touch Off. The oven
door locks and remains locked until the Clean cycle is
complete and the oven temperature has cooled below
300°C.

Care Recommendations

Care Recommendations
OVEN DOOR REMOVAL
The oven door can be removed for a thorough cleaning.
To remove, open the oven door completely. Rotate both
hinge latches forward to the open position. Close the door
to approximately 30° open, then lift up and out. Refer to
the illustrations below.
To reinstall, insert door hinges into the frame openings.
Open the oven door completely and rotate both hinge
latches back to the closed position.
CLOSED
POSITION
Oven door hinge latch Door open 30°
RACK GUIDE REMOVAL
To remove rack guides, push the top of the rack guide
towards the rear of the oven cavity. Tip the top of the
guide in towards the center of the oven and lift the bottom
posts of the guide out of the positioning holes.
To reinstall, insert the bottom posts into the positioning
holes and tip the rack guide up into position. Gently pull
the guide forward until it engages the top holes. Refer to
the illustration below.
RACK
GUIDE
Rack guide removal
wolfappliance.com | 9