Changing The Temperature Scale; Turning On Or Off The Peak Demand Function; Activating Or Deactivating The Sabbath Mode - Dacor DRF36C500 Serie Manual Del Usuario

Operations

Changing the temperature scale

You can switch the temperature scale between Fahrenheit and Celsius.
1. Tap any button ( ,
- This step may not apply to some models.
2. Tap until the °F and °C symbols on the fridge or freezer blink.
3. Tap or to select the desired temperature scale.
- Tap to select Fahrenheit.
- Tap to select Celsius.
4. Wait for 5 seconds or tap
- The °F and °C symbols stop blinking.

Turning on or off the Peak Demand function

You can turn on or off the Peak Demand function. For more information on the Peak
Demand function, see the SMART GRID Function (Demand Response) section.
To activate or deactivate the Peak Demand function, tap and hold
the function is enabled, the Peak Demand indicator (

Activating or deactivating the Sabbath mode

The Sabbath mode stays active for 85 hours once it is activated. After that, it will be
deactivated automatically.
• To activate or deactivate the Sabbath Mode, tap and hold
seconds. Then, when the display blinks, tap
- When the refrigerator is in the Sabbath mode, the buttons, display, and internal
lights do not function. The refrigerator and freezer, however, continue to cool.
NOTE
• If the refrigerator powers off and restarts (for example, if there is a power failure),
the Sabbath mode remains active. To end Sabbath Mode, you must deactivate it as
instructed above.
40 English
Dacor_T-TYPE_RF7000AC_DA68-04278M-00_EN.indd 40
, or ) to wake up the display.
to confirm your selection.
for 3 seconds. When
) turns on with a chime.
and simultaneously for 6
.
2022-04-28 10:55:36