Pur Line VENTY IND 90 Manual De Instrucciones página 8

EN
supply.
· Unplug from outlet when not in use and before cleaning. Don't fold and pull
the wire. Please switch off power before unplugging.
· Use a soft cloth to clean the appliance. Do not use solvents or harsh chemicals.
Never use direct water.
· Do not block air intakes or exhaust in any manner.
· Do not insert fingers or allow foreign objects to enter in the guard or the device,
as this may cause an electric shock, fire or damage to the appliance.
· Babies and the elderly should not be directly under high wind for a long time.
· Do not touch the unit with wet or damp hands, if barefooted.
· All repairs or servicing of the appliance must be performed by qualified
personnel.
· Use the fan away from high temperature, high humidity, acid and alkali oil,
insecticide, curtains and other articles that are easy to be sucked in.
· Do not place appliance (or electrical cord) near an open flame, cooking or
heating device.
· Keep the fan away from curtains or other objects that may be drawn in by the
fan.
· Do not use this device in the immediate surroundings of a bath, a shower or a
swimming pool.
· Do not use this appliance in dusty environments or environments with
flammable or explosive gases.
· Avoid keeping the unit in direct sunlight for a prolonged period of time.
· WARNING: Do not cover the device.
· To protect against the risk of electrical shock, do not immerse the unit, cord or
plug in water or other liquid.
· Avoid sharing a power outlet with any other appliances.
· During the transport, assembly and storage, observe not to collide and squeeze
the fan, especially the blade must be properly kept, to avoid any deformation, so
as not to affect the performance of the fan.
· In case of any abnormal noise, smell, smoke and other problems during the
use, shut off the power and send to our after-sales service department for
maintenance.
· CAUTION: Before removing the protective housing, make sure that the fan is
disconnected from the power supply.
· WARNING: TO reduce the risk of fire or electrical shock, DO NOT USE THIS FAN
with any SOLID STATE Speed Control Device.
6