Main Technical Parameters; Preparation Before Use; Points For Attention; Security - Baxtran BOW-P Manual De Usuario

EN
Dear Users,
The BOW-P Scales, are high performance products, developed and produced by our company, according to "Electronic Digital Platform Scale"
standards. It has the characteristics of rapid and accurate measurement, stable and reliable performance, simple and convenient to use. In
order to effectively help you to use our company's products correctly, please install and use the scale according to the instructions, which will
help your operation and extend the service life of the scale.

1. MAIN TECHNICAL PARAMETERS

2. PREPARATION BEFORE USE

1. Please charge the new scale for approx. 10 hours before using it. The 'WEIGHT' window will display the battery power, or you can check the
battery power when turning on the scale.
2. Please put the weighing scale on a flat place when using, and use four scale feet, let the scale keeping balance (do not put the scale on
moving or shaky place). Please take care that the bubble is in the middle.
3. Avoid placing the scale in a place where the temperature varies greatly or the air flows violently. For example: places with direct sunlight or
the outlet of air conditioner.
4. Avoid interference of other electronic products.
5. When power on, please do not put anything on the scale plate.
6. Power on 15-20 minutes before using, to ensure the accuracy of weighing.

3. POINTS FOR ATTENTION

3.1 SECURITY

The user must use the right way to access and use the power supply. Check whether the connection is in good condition. You must unplug the
power before replacing the fuse.

3.2 MAINTENANCE

• Gently move the scale to avoid falling or collision.
• Clean the scale with a dry or wet cloth. Do not use water to clean, to avoid damage; Do not use organic solvents to avoid scaling deformation
or paint peeling.
No matter whether the scale is powered on or off, do not place items or apply external forces that exceed the maximum weighing capacity of the
scale in order to protect the loadcell.
8
1.Specification
External analysis
Division text
Degree text
2.Auto-zero when power on
3.Power supply
4.Auto-tracking zero
5.Auto-alarm when the maximum
weighing is over 9d
6.Operating temperature range
7.Storage temperature range
8.Relative Humidity
1/30000
e=10d
1/30000
≤±4%FS
AC-110V~220V (+10%/-15%) 50Hz
- 10 ~ 40ºC
- 10 ~ 50ºC
≤70%R.H for storage,
≤85%R.H for operation
BOW-P USER MANUAL EN EN