Configuration; Setting Or Deleting Phone Numbers For Speed Dialling; Setting The Call Procedure; Storing Or Deleting A Trunk Access Code - Eaton ResistTel MB Instrucciones De Servicio

Configuration

Setting or deleting phone numbers for speed dialling

+ Speed dial button { Speed dial no. }
Speed dial button:= M1|M2|M3|
Speed dial number:=
Factory setting:
Maximum phone number length:
+ Speed dial button
The selected speed dialling memory will be deleted.

Setting the call procedure

+ { Call procedure }
Call procedure:= ||
Tone dialling procedure: Tone as long as button is pressed down
Tone dialling procedure: Tone length 70 ms
Tone dialling procedure: Tone length 90 ms
Impulse dialling procedure: Impulse/Pause ratio 1.5:1
Impulse dialling procedure: Impulse/Pause ratio 2:1
Factory setting: 3

Storing or deleting a trunk access code

+ { Trunk access code }
Trunk access code:=
Factory setting:
Maximum length of trunk access code:
+
The trunk access code will be deleted.

Setting the length of pause after dialling a trunk access code

+ { Trunk access code pause }
Trunk access code pause:=
1 s
2 s
3 s
4 s
5 s
Factory setting: 3
| |
+
| | | |
| | |
+
|
+
+M1| +M2| +M3
| | | | |
Memory empty
32 digits
+
+
| | | | |
no trunk access code
5 digits
+
| | |
| | |
| | |
17