Control Panel; Cleaning And Maintenance - Mx Onda MX-CDP2682 Manual De Usuario E Instalacion

CONTROL PANEL

1. Low speed selector.
By pressing this button the cooker hood motor will run at low speed.
2. Medium speed selector.
If you press this button the cooker hood motor will run at medium speed.
3. High speed selector.
Press this button to run the cooker hood motor at full speed.
4. Light on and off.
Press this button to turn the hood lighting on and off.
5. Shutdown of the extractor hood.
Press this button to turn off the cooker hood (except the light).
USING THE RANGE HOOD
We recommend that a few minutes before you start cooking, turn on the
extractor hood in order to create a constant air flow, the air flow will prevent
smoke and odors from being distributed throughout the different rooms.
Press button 1, 2 or 3 to turn on the cooker hood at the desired extraction
speed.
If you want to switch the extractor hood lighting on or off, repeatedly press
button 4.
Press button 5 to turn off the cooker hood (except the light).
When you finish cooking, it is advisable to leave the extractor hood running for
a few minutes in order to eliminate possible traces of smoke and odors that
remain in the kitchen.

CLEANING AND MAINTENANCE

Before cleaning, disconnect the extractor hood from the mains, turn off the
omnipolar isolation switch or unplug it from the mains socket.
Cleaning the outside and inside of the range hood
Clean the outside and inside with a damp cloth with warm water and
degreasing soap, then dry them carefully.
5 1
1
2 3
6
4
5