Dogtra 4500 EDGE Manual De Instrucciones página 47

1. Light-Tracking Mode
To activate the light-tracking mode, set the Mode button to L. Press the
transmitter button corresponding to the selected collar once (briefly).
The tracking light will now blink every 3 seconds.
To turn the tracking-light off, press the transmitter button corresponding
to the selected collar for more than two seconds.
While the tracking-light function is on, you can use the other functions
(Nick, Constant, Pager) at the same time. However, if the Light-locate
mode is activated, this will automatically switch off the Light-tracking
mode.
In any situation, the Light-Tracking mode can be turned back on by
placing the mode button to L and pressing the transmitter button for a
short time.
2. Light-Locate mode
To activate the light-locate mode, shift the mode button to L. Press the
transmitter button corresponding to the selected collar and hold it down.
The LED light blinks rapidly as long as you hold the button down, for a
maximum time of 12 seconds.
* When the Light-Tracking mode is on, the Tracking mode will
automatically be turned off after the Light-Locate mode action.
46
L (Light)
The LED light of the 4500
EDGE receiver collar has
two functions: Interval Light-
Tracking and Light-Locate
mode.