How To Use The Test Light - Dogtra 4500 EDGE Manual De Instrucciones

14. HOW TO USE THE TEST LIGHT

Test for a stimulation using the included test light.
1. Turn on the receiver/collar and the transmitter and place the test light
over the contact points as shown in the diagram.
2. The test light will illuminate momentarily when the front transmitter
button is pressed on the "N" mode. The light will stay lit as long as
the front transmitter button is pressed on the "C" mode, up to 12
seconds.
* For more information on the "N" and "C" modes, see section 2. How
the buttons work.
3. When the stimulation dial is turned up, the test light will emit a
brighter light.
NOTE: The test light may not emit a visible light when the intensity
bright light settings.
57