Descargar Imprimir esta página

Device Failure; Cleaning Guidelines - Nikon Optos Monaco P200TE Guia Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

Chapter 1 - Warnings and cautions
Unauthorized changes or modifications will invalidate the warranty of this device.
The manufacturer is
l
l
Do
NOT
or radio controlled devices) in the vicinity of this equipment, as it may cause performance
outside the published specifications, see Recommended separation distances on
page 69.
Adhering to the distance separation recommended will reduce the disturbances recorded
CAUTION
at the image level, but may
distances on page 69. However, when installed and operated as specified herein the
system will maintain its essential performance by continuing to acquire, display and store
diagnostic quality images safely.
It is recommended that the image server is not used adjacent to or stacked with other
equipment.
The use of accessories and cables other than those specified may result in degraded
electromagnetic compatibility of the system.

1.6 Device failure

In the unlikely event you hear a loud noise from the device, see smoke or smell burning,
stop imaging and isolate the device by unplugging.
If you suspect the device may be faulty see Troubleshooting on page 60.
WARNING
If the fault still persists, please contact your Optos representative, see Contact us on
page 71.
Ensure the mains socket is easily accessible.
CAUTION

1.7 Cleaning guidelines

The device cleaning instructions are detailed in Cleaning on page 56 . Adhere to the following cautions while
cleaning the device.
Cleaning patient contact parts
In order to prevent any contamination always clean and disinfect parts of the equipment
which will be in contact with the patient, see Cleaning before each patient on page 57.
Adequate cleaning and disinfection is necessary to prevent disease transmission.
Thoroughly clean and disinfect the equipment surfaces that contact the patient and all
CAUTION
equipment surfaces likely to become soiled during use.
Do
NOT
chin pad and face pad) in water or cleaning fluid.
Page 16 of 76
English
responsible for any interference caused by using:
NOT
Interconnect cables
NOT
Unauthorized changes or modifications to this equipment
use devices which intentionally transmit RF signals (cellular phones, transceivers
eliminate all disturbances, see Recommended separation
NOT
attempt to wash or immerse the patient contact parts (for example, forehead pad,
supplied by Optos
Copyright 2018, Optos plc. All rights reserved.
Part Number: G108707/8GCA

Publicidad

Solución de problemas

loading