Descargar Imprimir esta página

Battery Replacement; Cable Management - Nikon Optos Monaco P200TE Guia Del Usuario

Publicidad

Idiomas disponibles

Idiomas disponibles

Disinfection
Wear powder-free gloves at all times when cleaning the device including the scan head
and main mirror. If the gloves become contaminated they must be replaced immediately.
Always follow the cleaning and disinfecting agents' manufacturer's instructions and
precautions; for storage, method of application, protective gloves, shelf life and disposal
to help assure effective and safe use of the product.
CAUTION
Be careful
Do
NOT
scan head. Always allow cleaned areas to air-dry.
External surfaces must be cleaned of all visible contamination when they become dirty or soiled with bodily
fluids. Follow your internal clinic or hospital decontamination procedures.
Cleaning of the external surfaces of the device should be carried out on a regular basis, see General cleaning on
page 56 .

3.4.7.4 Battery replacement

Do
NOT
permitted to service the device.
CAUTION
A 3V Lithium coin battery is embedded in the hardware for the device and does
users. If there is a problem, please contact your Optos representative, see Contact us on page 71 .

3.4.7.5 Cable management

Do 
NOT
plugged directly into a wall socket.
To prevent electric shock:
l
l
l
WARNING
l
l
If the mains cable is damaged do not use the system and contact your Optos
representative, see Contact us on page 71.
Ordinary equipment (IP2X), without protection against ingress of water.
You must regularly inspect the equipment. If there is any damage please contact your
Optos representative, see Contact us on page 71.
CAUTION
Ensure the mains socket is easily accessible.
Part Number: G108707/8GCA
Copyright 2018, Optos plc. All rights reserved.
to damage the scan head covers when cleaning.
NOT
use lint cloths, tissues, or other materials that may create dust, on or near the
remove the scan head covers. Only Optos trained technical personnel are
plug the scan head into a power block or powered table. The scan head must be
Only use cables supplied by Optos.
Cables should
be extended or altered.
NOT
Mains supply must be earthed.
The device may only be serviced by Optos trained personnel.
Care must be taken never to touch exposed parts of the device while in physical
contact with a patient.
Chapter 3 - How to...
require to be changed by
NOT
Page 59 of 76
English

Publicidad

Solución de problemas

loading