Festool CTM 22 E Instrucciones De Servicio página 13

8 Maintenance and care
Always remove the mains plug from the socket
before carrying out any maintenance work!
Any maintenance and repair work requiring an
opening of the motor housing may only be carried
out by an authorised customer service workshop.
Electrotechnical tests must be performed in
accordance with the provisions of the Accident
Prevention Regulations (VBG 4) and with
DIN VDE 0701 Part 1 and Part 3.
According to DIN VDE 0702, these tests must be
performed at regular intervals and after repair or
modification.
A safety test is to be carried out at least once a
year by the manufacturer or an instructed person,
e.g. for possible damage to the filter and leaks in
the appliance, and to ensure that the control devices
are functioning.
If the user services the appliance, it must be
dismantled, cleaned and serviced, as far as
possible without any danger to the maintenance
staff and other persons.
Appropriate measures include decontamination
before dismantling, locally filtered forced ventilation
on the dismantling site, cleaning the service area,
and suitable personal safety equipment.
9 Accessories, filter
The accessory and filter order number can be found
in your Festool catalogue or on the Internet under
”www.festool.com”.
All manuals and user guides at all-guides.com
13
10 Warranty
Our equipment is under warranty for at least 12
months with regard to material or production faults
in accordance with national legislation.
In the EU countries, the warranty period is 24 months
(an invoice or delivery note is required as proof of
purchase).
Damage resulting from, in particular, normal wear
and tear, overloading, improper handling, or caused
by the user or other damage caused by not
following the operating instructions, or any fault
acknowledged at the time of purchase, is not
covered by the warranty.
Complaints will only be acknowledged if the
equipment has not been dismantled before being
sent back to the suppliers or to an authorised
Festool customer support workshop.
Store the operating instructions, safety notes, spa-
re parts list and proof of purchase in a safe place.
In addition, the manufacturer’s current warranty
conditions apply.
Note
We reserve the right to make changes to the
technical data contained in this information as a
result of ongoing research and development work.
The plastics used in this product have been marked
in the works to facilitate recycling.