Afrr Uninstalling/Installing Support Roller Of The Vacuum Bar; Afsb Uninstall/ Install Suction Bar - Kärcher BD 50/50 C Bp Classic Instrucciones De Servicio

AFRR Uninstalling/installing support roller of the vacuum bar

AFSB Uninstall/ install suction bar

 AFSB Uninstall/ install suction bar
1 Axle
2 Safety ring
3 Support roller, suction bar
4 Height adjustment of suction bar
 Remove the safety ring.
 Pull out axle.
 Remove support roller of the suction bar.
Note
Via the height adjustment of the suction bar, the distance
of the suction lips to the ground is adjusted.
The suction lips must be parallel and rest flush on the floor.
1 Rotary handle to incline the vacuum bar
2 Wing nuts
3 Suction hose
4 Vacuum bar
 Pull off the suction hose.
 Release the wing nuts.
 Pull out the vacuum bar.
Note
If the vacuum result is unsatisfactory the inclination of the
straight vacuum bar can be modified.
 Adjust the rotary handle to incline the suction bar.
English 9.808-230.0 Rev. 01 (03/20)
31