Diagram
Bp variant:
1 Cleaning head
2 Clamp
3 Screw
4 Electric connectors
Loosen the screw.
Remove clamp.
Separate the electric connectors.
Remove cleaning head.
AKKE Uninstall / install sliding contacts brush motor
AKBE Uninstall / install disc brush
AEAA Lay the device on its side for maintenance work
AKBW Uninstall/ install cleaning head
1 Screws
2 Plate
Unscrew the screws.
Remove metal sheet.
1 Electric connectors
2 Glide contact
3 Spring
Separate the electric connectors.
Remove the spring.
Pull the sliding contact out of the duct.
55
English 9.808-230.0 Rev. 01 (03/20)