Connecting The Duct Pipes; Inserting The Filters - FRECAN FLOW 53 Manual De Instalación Y De Usuario

Duct connection for worktop depth > 600 mm

4.7.3 Connecting the duct pipes


Cut the vertical air duct according to the floor unit
height

Use the duct tape in order to seal the pipes
Installation

4.8 Inserting the filters

Remove the air inlet flap, by rotating the turnable part of
8 X
90 degrees.
Air inlet flap [1] and grease filters [2] can be easily
inserted/removed by hands. See picture below.
EN
16