Disposing Of The Packaging; Disposing Of Old Appliance; Decommissioning And Disposal - FRECAN FLOW 53 Manual De Instalación Y De Usuario

8 Decommissioning and disposal


Observe all safety and warning information (see the
Safety section).

Follow the enclosed manufacturer's information.
8.1 Decommissioning
Decommissioning is understood as final shutdown and
disassembly. Following decommissioning, the device can
either be installed into other units, sold on privately or
disposed of.
Electricity connections may only be disconnected
by qualified specialists.

To decommission, switch the device off (see Operation
section)

Disconnect the device from the power supply.
8.2 Disassembly
For removal, the device must be accessible for disassembly
and disconnected from the power supply.

Undo the appliance fixture.

Remove the silicone joints.

Remove the device from the worktop by lifting it
upwards.

Remove any other accessories.

Dispose of the old device and any contaminated
accessories.

8.3 Disposing of the packaging

Please ensure the environmentally-friendly disposal of the
packaging that came with your appliance. Recycling the
packaging material saves on resources and cuts down on
waste.

8.4 Disposing of old appliance

This symbol on the product or on its
packaging indicates that this product may
not be treated as household waste. Instead
it must be handed over to the applicable
collection point for the recycling of electrical
and electronic equipment. By ensuring that
this product is disposed of correctly you will help to protect
the environment and human health, which could otherwise
be harmed through the inappropriate disposal of this
product. For more detailed information about recycling this
product, please contact your local city office, your
household waste disposal service or the shop where you
purchased the product.
Decommissioning and disposal
EN
41