Preparing For Use; Tips For Use; Use; Electrically Adjustable Sections - Auping AVS 488 Manual De Instrucciones

All manuals and user guides at all-guides.com

3.5 Preparing for use

Check that the mesh base can move freely.
Only adjust the mesh base while it is in a
horizontal position, securely fixed to the
supporting legs, or to the supports provided
within the bed surround.
Check that the mattress is attached to the
mesh base properly.
Insert the plug into the wall socket.

3.6 Tips for use

A new mattress has a certain amount of
rigidity, which will disappear within a few days.
Consequently, your mattress will not optimally
follow the contours of the mesh base when it
is initially adjusted. We therefore recom mend
that you lie down on the mattress while
adjusting the positions for the first time.
GB16
_014KY_3428 BW.pdf - pag.16

4. Use

4.1 Electrically adjustable sections

The handset is used to adjust the elec trically
adjustable sections (see fig. 5).
1. Raise head support
2. Lower head support
3. Raise back section
4. Lower back section
5. Raise foot end
6. Lower foot end
7. Raise head support, back section
and foot end
8. Lower head support, back section
and foot end
Press one of the 'up' or
'down' buttons, holding
it down
desired
reached. Only one but-
ton can be operated at
a time.
4.2 Setting the Comfortslides
The mesh base can be adapted to the shape
of your body. The slides are incorporated in
the mesh base at both shoulder and hip level.
Remove the mattress from the mesh base.
The illustrations of the various positions of the
Comfortslides
of course set the slides to the position you
consider the most comfortable.
Lift the slides slightly, then slide them to the
desired positions.
Replace the mattress on op the mesh base.
LET OP !!! Lage resolutie!
until the
position is
®
® are examples only. You can
fig. 5
April 23, 2008