Festool ETS 150/3 EQ Instrucciones De Servicio página 7

Technical data
Wattage
Speed (220 - 240 V)
Speed (110 V, 120 V)
Sanding stroke
Sanding base
Weight
Degree of protection
The specifi ed illustrations can be found at the beginning of the operating instructions.
1 Safety instructions
Before using the machine, read the
enclosed safety instructions and the-
se operating instructions carefully
and thoroughly.
Save all enclosed documents and pass the
machine with all these documents only.
Always wear protective goggles
because of possible dangers when
sanding.
The manufacturer's handling and proces-
sing instructions must be observed without
fail if explosive or self-igniting dusts are
likely to occur during sanding.
Harmful/toxic dusts can occur during your
work (e.g. lead-containing paint, some
types of wood and metal). Contact with
these dusts, especially inhaling them, can
represent a hazard for operating person-
nel or persons in the vicinity. Comply with
the safety regulations that apply in your
country. Connect the electric power tool to
a suitable extraction system.
To protect your health, wear a P2
protective mask.
2 Correct usage
The sanders are designed for sanding wood,
plastic, composite materials, paint / var-
nish, fi lling material and similar materials.
Metal and materials with an asbestos con-
tent must not be processed with these
tools.
The machines must not be damp nor ope-
rated in a damp environment for electrical
safety reasons. The machines may only be
used for dry sanding. The user bears sole
responsibility for any damage or accidents
resulting from incorrect use.
All manuals and user guides at all-guides.com
ETS 150/3 EQ
310 W
4,000 - 10,000 rpm
6,000 - 10,500 rpm
3.0 mm
Ø 150 mm
1.8 kg
3
Typical values established in compliance
with EN 60745:
Sound pressure level
Sound-power level
Measuring uncertainty allowance K = 4 dB
Measured acceleration
4
Switch (1.2) is an on/off switch. For con-
tinuous use it can be engaged with the
lateral locking button (1.3). Pressing the
switch again releases the lock. See Fig.
3 for connection and disconnection of the
power cable.
5
This allows the sanding speed to be adap-
ted to the optimum level according to the
material concerned (see Chapter 9). The
speed is set using the rotary control button
(1.1).
6
7
/ II
Noise and vibration informati-
on
Electrical connection and opera-
tion
The mains voltage must corre-
spond with the voltage on the
rating plate!
Electronic control
The ETS 150/3 EQ, ETS 150/5 EQ
has an electronic control with which
the rotational speed can be varied
step-free.
Dust extraction
Dust extractors prevent large accu-
mulations of dust in the air in the
working environment and dirt coll-
ecting in the workplace.
ETS 150/5 EQ
310 W
4,000 - 10,000 rpm
6,000 - 10,500 rpm
5.0 mm
Ø 150 mm
1.8 kg
/ II
72 dB(A)
83 dB(A)
6.0 m/s²