Festool ETS 150/3 EQ Instrucciones De Servicio página 9

- smoothing wood surfaces with sanding felt
prior to staining
- rubbing down stained surfaces with san-
ding vlies
- rubbing down or removing excess lime
paste with sanding vlies
2 - 3
- interim paint sanding on stained sur-
faces
- cleaning natural wood window grooves
with sanding felt
1 - 2
- sanding stained edges
- sanding thermoplastic synthetics
10 Sanding base brakes
The sanding base is braked by a collar (2.2)
in order to prevent any uncontrolled exces-
sive speed of the sanding base. Because the
collar wears down in the course of time, it
has to be replaced by a new one (order no.
453 388) as soon as there is any reduction
in the braking effect.
11 Maintenance and care
Always remove the plug from the
mains supply socket before carrying
out any work on the machine!
The cooling air vents on the motor housing
must always be free of blockages and clean
to ensure air circulation.
Any maintenance or repair work requiring
the motor housing to be opened may only
be carried out by an authorised service
workshop.
All manuals and user guides at all-guides.com
12
Our equipment is under warranty for at
least 12 months with regard to material or
production faults in accordance with nati-
onal legislation.
In the EU countries, the warranty period f
is 24 months (an invoice or delivery note
is required as proof of purchase).
Damage resulting from, in particular, nor-
mal wear and tear, overloading, improper
handling, or caused by the user or other
damage caused by not following the opera-
ting instructions, or any fault acknowledged
at the time of purchase, is not covered by
the warranty.
Complaints will only be acknowledged if
the equipment has not been dismantled
before being sent back to the suppliers or
to an authorised Festool customer support
workshop.
Store the operating instructions, safety no-
tes, spare parts list and proof of purchase
in a safe place.
In addition, the manufacturer's current
warranty conditions apply.
Note
We reserve the right to make changes to
the technical data contained in this infor-
mation as a result of ongoing research and
development work.
9
Warranty