Publicidad
Idiomas disponibles
Idiomas disponibles
6. Software Functions
This unit can be used in connection with
your personal computer (PC) running the PC
Link Blood Pressure nalyzer software. Your
PC will allow a capacity of monitoring 80
patients, each with 1000 data (note: overuse
will lower system efficiency). The memory
data can be transferred to the PC by connecting the monitor via the
included USB cable with your PC. Note: The software does not work with
Mac computers.
6.1. Installation and Data Transmission
a) Insert CD into CD ROM drive of your PC. The installation will start
automatically. If not, click on SETUP.EXE.
b) Connect the monitor via USB cable with the PC. Three horizontal bars
will appear on the display and last for 3 seconds.
c) The bars will then flash to indicate that the connection between com-
puter and device is successfully made. s long as the cable is plugged,
the bars will keep flashing and the buttons are disabled.
During the connection, the device is completely controlled by the
computer. Please refer to the 'help' file in the software for detailed
instructions or call 1-800-568-4147.
7. Setting the Medication Reminder
This instrument allows you to set two alarm times at which an alarm signal
will then be triggered. This can be a useful aid, for instance as a reminder to
take medication or to remind you to take your blood pressure at the same time
each day.
1. To set an alarm time, press the time button (the instru-
ment must have been switched off beforehand) and
All manuals and user guides at all-guides.com
• Windows XP, Vista, 7
13
Publicidad
