Operation Of The Bamix ® Cordless Hand Blender - Bamix Cordless Manual De Instrucciones

4 LEDs lit = full battery charge for approx. 20 minutes
3 LEDs lit = ¾ battery charge for ≥ 15 minutes operating time
2 LEDs lit = ½ battery charge for ≥ 7 minutes operating time
1 LEDs lit = ¼ battery charge for ≤ 7 minutes operating time
Recommendation: charge the battery
LED display: blender in operation
The large multifunction button lights up permanently in blue. Note: The blender will
switch itself off after 60 seconds if not used. See "LED display without LED light".
LED display: without LED light
The LED display of the hand blender has a switch-off function (sleep function) that
activates after 60 seconds of non-use and puts the hand blender into sleep mode.
By pressing the large ON button once, the appliance is reawakened and is ready to
work. This sleep function has been built in to allow longer operation time and also to
prolong the battery life.
Operation of the bamix
CAUTION! Risk of injury when affixing and replacing attachments.
For a detailed description, see "Affixing and replacing attachments"
(page 33).
The blades of the attachments are very sharp! CAUTION, risk of injury! Do not
use your hand to remove pieces that block the blade! Use a blunt object (e.g. a
wooden or plastic handle) for this purpose.
• Fill a flat-bottomed receptacle or a bamix
not switch on the hand blender until it is in the receptacle.
• With coated receptacles, take care not to damage the coating. For further instruc-
tions on applications of attachments such as mixing, puréeing, whisking, etc.,
please see www.bamix.com.
Note: To protect the hand blender from being overloaded, it will switch off
automatically in the event of overheating or blade blockage. The hand blender
can then be switched on again and used.
cordless hand blender
®
Before you can work with the appliance, you need to affix an
attachment.
blender jug (see www.bamix.com). Do
®
cordless
27