Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
ENGLISH
Additional notes:
•
If no target display surface is selected during 30
seconds, the „Select CDx" the message will stay on
the display. Press any button to clear.
•
Do not change audio source during the selection
period because this would cancel the selection.You
can restart it any time later.
•
Use the BMW_Text_disable.mp3 config file to
disable text display. This can be helpful if you made a
wrong selection and nothing is displayed.
•
Certain head units require a double keypress for
normal operation. The first press just erases the text
from the display; the second sends the command.
This is not a bug, rather an inherent behaviour of
some head units. If you dislike it please deselect
BMW text mode.
Troubleshooting
You cannot switch your radio to CD changer mode:
1. Check cables to make sure everything is tight.
2. Remove the fuse of the radio, wait for 30 seconds,
and then reinsert the fuse. This will reset your radio
and the interface. You may have to enter the radio
security code, so please keep it handy.
3. Consult with your installer or contact your local
Dension support centre.
You cannot hear music playing:
1. Make sure CD changer, SAT mode, or AUX is selected
on your radio. Please study the owner's manual for
your radio to learn the correct key.
2. Make sure that iPod is playing something by its own.
You cannot control the iPod from the radio:
1. Make sure the firmware on your iPod is the most
recent. For updates please visit:
www.apple.com/ipod
2. Reset the iPod. On the click-wheel iPods hold the
centre button and the Menu buttons.
generation models hold Menu and Play/Pause
buttons until iPod reboots. (Resetting will not erase
your music, it will only restart the operating system of
iPod.)
10
ice>Link Plus
On the 3
rd
Publicidad
