Publicidad
All manuals and user guides at all-guides.com
Setting up the ONE FOR ALL 5
Before you start, please read these instructions carefully
Direct code set up
Example: To set up the ONE FOR ALL 5 for your television:
1
Find the code for your device in the Code list (page 143 -
165). Codes are listed by device type and brand name.
The most popular code is listed first. Make sure your
device is switched on (not on standby).
2
Press the TV key on the ONE FOR ALL 5 for the device
you wish to Set-Up.
3
Press and hold down the M (MAGIC) key
until the red LED underneath the POWER key
blinks twice (the red LED will blink once
then twice).
_ _ _ _
4
Enter your (four-digit device code) using the number
keys. The red LED will blink twice.
5
Now, aim the ONE FOR ALL 5 at your device and
press POWER If your device switches off, the ONE
FOR ALL 5 is ready to operate your device.
6
Turn your device back on and try all the remote's functions to ensure
they are working properly. If the functions do not work properly,
repeat steps 1-5 using another code listed under your brand.
7
If your device does not respond, follow steps 1 to 5 with
each code listed for your brand. If none of the codes listed
for your brand operate your device, or if your brand is not
listed at all, try the search method described on page 6.
Important notes:
- Most TV's do not switch on pressing the POWER key. Please try pressing a
"number" key or the "TV-text off" key to switch your TV back on.
- Some codes are quite similar. If your device does not respond or is not
functioning properly with one of the codes, try another code listed under
your brand.
- If your device's original remote control does not have a POWER key, press
PLAY instead of POWER when setting up your device.
- Remember to press the correct device key before operating your device.
Only one device can be assigned to a device key. If your original remote
operates more than one device, you need to set up each device separately.
WWW.ONEFORALL.COM
x2
5
Publicidad
