For Your Safety - Davin DV-14 Manual De Instrucciones

1 = Continue 'ON'
0 = Everything 'OFF'
= The DV-14 switches at the set times.
• Put the 3-position switch on the clock
• Now we have to determine when the DV-14
needs to be switched 'ON' and 'OFF'.
• Therefore, the pins (the so called 'running
weights') that are around the clock need to be
pushed out.
Are the pins pushed INWARDS; The clock will
switch 'OFF'.
Are the pins pushed OUTWARDS; The clock
will switch 'ON'.
• To have the timer switch between 2 times (the
'ON' time, and the 'OFF' time), ALL the pins
between those 2 times need to be pushed out.
• The shortest switch position of the clock is
15 minutes.
• When you have determined the 'ON' and
'OFF' times, turn the clock slowly (manually)
clockwise to make sure everything is correct.
• If you are sure that everything switches at the
right time, the DV-14 is ready for use.
8
DV-14 Binnenwerk PMS.indd 6
All manuals and user guides at all-guides.com
Manual DV‑14

1.6 FOR YOUR SAFETY

• The correct operation of the DV-14 is only
guaranteed, if you observe this manual.
• Although it is possible to install the DV-14
yourself, we recommend to have this done by
a certified installer.
• Before installing the DV-14 install the 220V,
the 220v. voltage MUST be taken off the power
point (Check this!)
• This guide should only to be used for the
DV-14.
• DAVIN products are covered by a 1-year
®
warranty.
• To qualify for this warranty, you are required
to return the DV-14 to the point of sale.
• If changes are made to DAVIN
without the express and written prior
permission of the manufacturer, the warranty
will become void.
• The DAVIN warranty will also become void
®
with improper installation of the DV-14.
• Neither the manufacturer, nor the importer,
nor the retailers of the DV-14 are liable for
damages arising from the use of the DV-14.
SERVICE NUMBER / HELPDESK:
+31 (0)6 – 14 813 447
products
®
31-10-2012 1:50:40
1
E
q
6
1
D
C
P
G
1
P
g
p
e
u
S
r
u
E
1
D
(
1
E
s
D
¡
E
D