Publicidad
Idiomas disponibles
Idiomas disponibles
2.
Make sure the water pump is attached to the unit correctly (A).
3.
Place 1 or 2 cooling elements in the water reservoir. The water temperature will remain around 6°C
lower than room temperature for around 4 hours, ensuring a chilled air flow. The 2 refrigerating
elements are reusable. Alternatively, add ice cubes instead of the refrigerating elements, they will
have a chilling effect as well.
4.
Fill the water reservoir with clean water (B). When filling the water reservoir, make sure the water is
between the minimum and maximum levels (see level indicator on side of water reservoir) for the
unit to work properly.
5.
Close the water reservoir (C).
A
6.
The water level can be checked during use via the water level indicator on the front of the unit.
TIMER: TIMER
You can set the timer between 1 and 8 hours. Press the timer button. The associated symbol
on the display. Each press of the button increases the timer by one hour. Once the configured time has
passed, the device will deactivate automatically.
DELAYED START
The unit can be pre-set to start after a maximum of 8 hours. To do this, follow the steps below:
1.
Press and hold the timer button for a few seconds when the unit is in standby mode.
2.
The symbol for the timer will light up. Set the desired time (max. 8 hours).
3.
Set the desired settings.
4.
The unit will start after the pre-set time has elapsed and will use the chosen settings.
CLEANING AND MAINTENANCE
·
Remove the plug from the socket before cleaning the appliance.
·
For optimal and hygienic use, clean the water reservoir once a week. To do this, follow the steps
below:
1.
Remove the water reservoir from the unit. Do this by gently pressing the two sides of the
reservoir when it no longer slides out. Loosen the water pump by
turning it a quarter turn clockwise. The reservoir can now be
removed and cleaned thoroughly.
2.
Clean using mild detergent and water. Empty the water reservoir,
dry it off and return it to the unit.
3.
Make sure the water pump is attached correctly and there is water in
the reservoir before using the unit again.
28
DO159A
B
C
appears
Publicidad
