Troubleshooting Guide; Product Disposal - UFESA SMART DIGITAL Manual De Instrucciones

5. Wait until the water container is empty. Then, press the steam level selection button (3) and
steam release button (5) together again for several seconds. A beep will be heard and icon
will be removed from the display.

TROUBLESHOOTING GUIDE

PROBLEM
Unit fails to heat up and
steam. Power indicator
light does not illuminate.
Water runs out of the holes
in the soleplate.
Brown streaks come throu-
gh the holes in the solepla-
te and stain the linen.
There is no steam or there
is little steam.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic
devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal
framework applicable in the European Union for the disposal and reuse of waste elec-
tronic and electrical devices. Do not dispose of this product in the bin, instead going to
the electrical and electronic waste collection centre closest to your home.
POSSIBLE CAUSE
Unit is not plugged in.
Water has condensed in the
pipes because you are using for
the first time or you have not
used it for some time.
The soleplate is not hot enough. Wait until the iron soleplate is
You are using chemical desca-
ling agents or addititves in the
water for ironing.
The water tank is empty.
The soleplate is not hot enough. Wait until the iron soleplate is
SOLUTION
Plug into electrical outlet.
Press the steam trigger away
from your ironing board until
the iron produces steam.
hot enough
Never add this type of pro-
duct in the water tank or in
the steam chamber.
Fill the water tank.
hot enough
21