auna iTuner 320 BT Manual De Instrucciones página 53

The default auto time update setting is "Update from Network". If you would
like to manually set the time, it is recommended to turn the Auto update
function off.
Inactive Standby
Use the Inactive Standby to turn off the unit after a certain time in play
mode.
1. During System settings mode, press the
Inactive Standby and then press the SELECT button to confirm.
2. The display will show : Off > 2 hours > 4 hours > 5 hours > 6 hours
3. Press the
button to confirm.
Language
1. During System settings mode, press the
Language and then press the SELECT button to confirm.
2. Press the
choice.
3. Press the SELECT button to confirm.
Factory Reset
There may be times when you need to reset your unit back to the factory
settings especially when you have moved house. If you experience
reception problems you may want to reset and try again.
If you move to another part of the country and pick up the local and national
DAB+ stations in that area, your previously tuned channels may no longer
be available.
1. During System settings mode, press the
"Factory reset", and press the SELECT button to confirm.
2. Press the
to confirm or select No to cancel.
Note: After the system reset, all the tuned stations, Internet, DAB & FM
preset stations will be erased.
Software update
1. During System settings mode, press the
Software update and then press the SELECT button to confirm.
2. Press the
and then press the SELECT button to confirm.
Before downloading software, ensure that the radio is plugged into a
stable mains power connection. Interrupting the mains supply during
software download can lead to functional disturbances and/or damage
to the unit!
buttons to select and then press the SELECT
buttons to change the display language of your
buttons to select Yes, and press the SELECT button
buttons to select Auto-check setting or Check now,
buttons to select
buttons to select
buttons to select
buttons to select
EN
53