Fm Operation - auna iTuner 320 BT Manual De Instrucciones

EN
FM
radio
FM Radi o
64

FM OPERATION

Press MODE button on unit or remote control to access Mode Menu. Turn
the SCROLL&SELECT dial on unit or press
to select FM Radio mode, then press SCROLL&SELECT dial on unit or
SELECT button on remote control to confirm.
The display will show the frequency
Auto Scan
Press SCAN button on unit or remote control to start searching for a station.
Once a station has been found, the scanning will stop automatically.
Alternatively, press and hold
station.
Note: The search may not stop at a station with a very week signal.
Manual Tuning
To search for FM stations manually, turn the SCROLL&SELECT dial on unit
or press the
desired frequency is reached.
Note: With FM radio, it may be necessary to fine tune each station by
turning the SCROLL&SELECT dial on unit or pressing
on remote control repeatedly. Each press will adjust the frequency by
0.05 MHz. If reception is still poor, adjust the position of the aerial or try
moving the radio to another location.
FM Display Modes
Every time you press the MENU/INFO button on unit or INFO button on
remote control , the display will show the following display modes: Radio
Text – Programme Type – Frequency – Date
RDS Radio This is a scrolling message information about the
Text current programme.
Programme This describes the "Style" or "Genre" of music that is
Type being broadcast.
Station When an RDS station is received, the name of that
Name / station will be displayed, or if not the frequency will
Frequency bedisplayed.
Date This displays the current date provided automatically by
the broadcaster.
⏮ ⏭
/
buttons to start searching for a
buttons on remote control repeatedly until your
buttons on remote control
buttons