Setting The Alarm - auna iTuner 320 BT Manual De Instrucciones

SETTING THE ALARM

Setting the Alarm
1. Press the ALARM button on the remote control, the display shows
"Alarm (1 or 2): Off [hh:mm]".
2. Press the
and then press the SELECT button to start thesetting of the following
parameters.
Press the buttons to select then press the SELECT button to
confirm.
Enable Off/ Daily/ Once/ Weekends/ Weekdays
Time (Alarm On time)
Mode Buzzer/ Internet radio/ Spotify/ DAB/ FM
Preset Last Listened/ (Preset station)
Volume Muted, 1-32
Save Save and confirm the alarm setting
3. Finally, select "Save" and press the SELECT button to save the alarm
setting. When the alarm is set, the alarm icon will appear on the display
during standby mode.
4. To temporarily switch off alarm, press the SNOOZE button on remote
control to activate Snooze function when alarm sounds. Press the
SNOOZE button on remote control repeatedly to set snooze period time
of 5, 10, 15 or 30 minutes in turn. The set snooze time will show on the
display and unit will go to standby.
5. To turn off the alarm when it sounds, press the VOLUME/ dial on the
unit or the  or ALARM button on the remote control.
Cancelling the Alarm
1. Press the ALARM button on the remote control, the display shows
"Alarm (1 or 2): On [hh:mm]".
2. Press the
then press SELECT to start the setting of the timer.
3. Press the
button to confirm.
4. Press the
button to confirm.
5. Finally, select "Save" and press the SELECT button to save the setting.
6. Alternatively, during Standby mode, press the ALARM button on remote
control repeatedly can turn the saved Alarm 1/2 on/off sequentially.
If no button is pressed within approx. 15 seconds, the unit exits timer setting
mode automatically.
buttons to select the Alarm number (1 or 2)
buttons to select the Alarm number (1 or 2) and
buttons to select "Enable" then press the SELECT
buttons to select "Off" then press the SELECT
EN
69