Publicidad
Lower decorative chimney
Fix the exhaust pipe on the hood body,
connect chimney and hood body with 2
screws 12. connect chimney fixing
bracket and chimney with 2 screws 12.
Hook the hood body
Hook the hood body to the hood fixing bracket 20.
Level the hood body itself.
Fix a Chimney fixing bracket 21 with 2 screws
10 (5 x 50) at the horizontal line B to prevent the
hood body from accidently sliding off the hood
fixing bracket.
Right
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the choice of
which is left to the installer.
If to install a ɸ 120 mm air exhaust connection, insert the reducer
flange 3 on the hood body outlet.
Fix the pipe 4 in position using sufficient pipe clamps (not
supplied).
Remove possible charcoal filters.
Wrong
EN-6
C
B
Publicidad
