Titan T8000 Guia Del Usuario página 34

3. Turn the motorized nozzle upside down.
4. Lift up the front wheels to show the two (2) screws. Unscrew the two screws.
Front wheels
5. Turn the nozzle right side up. Remove the top cover and the headlight cover.
6. Pull the PCB board out of the slot to identify the two terminals as shown. Press the small
tab on the terminals to remove the two (2) terminals from the PCB board. Release the
two motor wires from the guide slots.
PCB Board
Terminals
-34-
Screws
Headlight Cover
Top Cover
Tab