Publicidad
Idiomas disponibles
Idiomas disponibles
USE OF PRODUCT
How to use 5 Spd Dig Touch Control Product
Cleaning Periods for Metal Filters
26
3.
Dig display You can follow which speed the product is cur-
rently working on this display.Fig. 14
4.
Press this button to increase the motor speed.Fig. 14
5.
When timer button is pressed, a 15-minute timer function will
be activated; display will give a signal once the timer starts
and the motor will stop automatically after 15 minutes.Fig. 14
6.
Press this button to turn on and off the lamp.Fig. 14
Filters should be cleaned when "C" signal appears on the Display
or (due to usage) every 2 or 3 weeks. To delete "C" signal after the
filters are cleaned and replaced, press and hold (
than 3 secs (when device is off). Letter "E" will appear on the Dis-
play and it will switch to normal operation. If operation before
deleting the "C" signal is required, active motor speed will appear
for 1 sec when you press (
resume running.
HOOD USER GUIDE
) button and then the motor will
) button more
26.11.2018
Publicidad
