Unpacking; Assembling - Optika Italy B-1000 Serie Manual De Instrucciones

Unpacking

The microscope is housed in a moulded Styrofoam container. Remove the tape from the edge of the container
and lift the top half of the container. Take some care to avoid that the optical items (objectives and eyepieces)
fall out and get damaged. Using both hands (one around the arm and one around the base), lift the microscope
from the container and put it on a stable desk.

Assembling

Once you open the box, these are the microscope's components:
①
Put the microscope stand on a
solid table.
First insert the Bertrand lens
attachment, use the 2mm
Allen wrench to tighten the
screw.
All screws are already inser-
ted into each threaded hole.
(Fig.1)
All manuals and user guides at all-guides.com
③
②
④
⑦
⑥
Page 6
① Condenser
② Optical head
③ Main body
④ Eyepieces
⑤ Power supply
⑥ Stage
⑦ Objectives
⑧ Bertrand lens and analyzer
⑨ Retardation plates
⑧
⑤
⑨
Fig.1