Descargar Imprimir esta página

Electrical Safety; Personal Safety - VITO GARDEN VIAC450A Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
WARNING
To reduce the risk of injury, the
user must read and understand the
operator's manual.
WARNING
Do not attempt to operate this
trimmer until you have read
thoroughly and understood
completely all instructions and
safety rules contained in this
manual. Failure to comply may
result in accidents, electric shock
or serious personal injury. Save
operator's manual and review
frequently for continuing safe
operation. and instructing others
who may use this tool.
READ ALL INSTRUCTIONS
GENERAL SAFETY RULES
WORK AREA SAFETY
Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust.
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.

ELECTRICAL SAFETY

Power tool plugs must match the
outlet. Never modify the plug in
any way. Unmodified plugs and
matching outlets will reduce risk of
electric shock.
Do not expose power tools to rain
or wet conditions. Water entering a
power tool will increase the risk of
electric shock.
Never use the cord for carrying,
pulling or unplugging the power
tool. Keep cord away from heat,
oil, sharp edges or moving parts.
Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool
outdoor, use an extension cord
suitable for outdoor use an
extension cord suitable for outdoor
use reduces the risk of electric
shock.

PERSONAL SAFETY

Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired
or under the influence of drugs,
alcohol or medication. A moment of
inattention while operating power
tools may result in serious personal
injury.
Use personal protective equipment.
Always wear eye protection.
Protective equipment such as dust
mask, non-skid safety shoes, head
hat, or hearing protection used for
appropriate conditions will reduce
personal injuries.
Prevent unintentional starting;
ensure the switch is in the
off-position before plugging in.
Carrying power tools with your
finger on the switch or plugging in
power tools that have the switch on
invites accidents.
Keep proper footing and balance at
all times. This enables better control
of the power tool in unexpected
situations.
Dress properly. Do not wear loose
clothing or jewellery, keep your
hear, clothing and gloves away
from moving parts. Loose clothes,
jeweler or long hair can be caught
in moving parts.
POWER TOOL USE AND
CARE.
Do not force the power tool. Use
the correct power tool for your
application. The correct power tool
will do the job better and safer at
the rate for which it as designed.
Do not use the power tool if the
switch does not turn it on and
off. Any power tool that cannot
be controller with the switch is
dangerous and must be repaired.
Disconnect the plug from the
power source before making any
adjustments, changing accessories,
or storing power tools, Such
preventative safety measures
reduce the risk of starting the power
tool accidentally.
Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
Condition that may the power tool
repaired before use. Use of the
power tool for operation different
from intended could result in a
hazardous situation.
SERVICE
Have your power tool serviced by
a qualified repair person using only
genuine replacement parts. This will
ensure that the safety of the power
tool is maintained
WARNING
To assure safety and reliability, all
repairs should be performed by
an Authorized Technical Service
Centre or other Qualified Service
Organization.
WARNING
The operation of any power tool
can result in foreign objects being
thrown into your eyes, which can
result in severe eye damage. Before
beginning power tool operation,
always wear safety goggles with
side shields, or a full face shield
when needed. We recommend Wide
11

Publicidad

loading