Tineco PURE ONE S12 Serie Manual Del Uso página 53

Problem
Brush roller tangled
indicator blinking
Power indicator
blinking
Air channel blocked
indicator blinking
Dust sensor malfunction
indicator blinking
WiFi indicator is off
Battery indicator
blinking red on work
Battery indicator &
Battery icon
blinking red
during charging
Battery icon on screen
blinking green during
charging
Note:
If the above troubleshooting guide fails to provide a solution, please visit our website
www.tineco.com for further support.
Possible cause
The brush roller is blocked
Motor failure
The appliance is blocked, or full
of dust in filter and dustbin
1. The sensor inside the dustbin
is blocked
2. The dustbin is not installed
WiFi is not connected
The battery is overheated
Abnormal charging condition
No battery pack or battery pack
installed improperly during
charging
51
Solution
Remove blockages
Remove blockages, or restart
Remove blockages, clean the
filter and dustbin
1. Clean the dust on the inner
sensor
2. Install the dustbin correctly
Follow the in-app guide to
connect to WiFi
Remove the battery pack and let
it cool
The adaptor is not designed for
PURE ONE S12
Install the battery on the main
body properly