Beta 972/C10 Instrucciones página 7

Fig. 4 Fig. 5 Fig. 6
Bolt removal by means of self-adjusting bits for anti-theft bolts
This kind of disposable impression is used cod. 00972011 for removing hardened
anti-theft bolts. (Fig. 7)
The sides of the bit have 2 different sections, which should be chosen according to
the diameter of the bolt head. After identifying the side, connect the impact socket
holder to the 24-mm impact socket driver contained in the kit; then connect it all to the
blade holder and fit in the bit; finally, hit with a club hammer and remove the bolt.
The bit has been specially designed to get deformed and adjust to the special heads
of anti-theft bolts. (Fig. 8-9)
Fig. 7 Fig. 8 Fig. 9
NB: Always check that all the tools have been replaced in the case and store it in a
safe place away from humidity.