Descargar Imprimir esta página

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 90

Maintenance

Maintenance
Outfl ow grille
 Cleaning the air outlet (When dirt becomes and
issue)
Clean the air outlet with a soft brush.
Exercise caution not to have dust fall inside the air purifi er.
If covered in dust, wipe up dust with a soft damp cloth.
• Do not use a hard brush etc. (Breakage may result)
Unit
When dirt becomes an issue
• Wipe up dirt with a soft damp cloth.
• When dirt buildup is severe, wet a cloth with kitchen-
use neutral detergent and wipe up the dirt.
• Do not use a hard brush etc. (Damage may result)
Pre-fi lter
(Front/Left-side/Right-side)
About every 2 weeks
Vacuum clean
Wash/Rinse
• After removing any dust using
a vacuum cleaner, remove and
wash the fi lter with water and
then leave it in shade to dry off.
• Use a soft brush when cleaning
the spaces in the grid.
Attention
• Do not use a cotton bud or
hard brush etc.
(Partial breakage of the fi lter
may result)
• Do not apply heavy force.
(Partial breakage/damage of
the fi lter may result)
• When dirt buildup is severe,
leave the part soaking in
lukewarm or room temperature
water mixed with kitchen-use
neutral detergent, thoroughly
rinse off the detergent and leave
the part in shade to dry off.
13
Wipe
Removing
Grip the indent in the
pre-fi lter and pull.
Grip the center of
1
the pre-fi lter resting
your thumb against
the unit.
Pull toward
2
you.
Attaching
Insert the hooks
(2 places) into
the unit and
press until a
catching sound
is heard.
Hooks
(2 places)
Reverse side
Insert the hook
Hook (1 place)
(1 place) into the
unit.
Push both ends
until securely
Viewed from above
attached.
Caution:
For removing the pre-fi lter (front), use 3
fi ngers to pull towards you to prevent
unavoidable damage of fi lter mesh.
WARNING
Before cleaning and maintenance work, make sure to
unplug the unit. (An electric shock or injury may result)
(Left-side)
(Right-
side)
(Front)

Publicidad

Solución de problemas

loading