Skil 1210 Manual Original página 6

Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use.
maintained power tools.
Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges are less
Use the power tool, accessories and tool bits etc., in
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
5) SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
SAFETY INSTRUCTIONS FOR SANDERS
Secure the workpiece (a workpiece clamped with
standstill
when original accessories are used
ear protection
Hold power tool by insulated gripping surfaces,
because the belt may contact its own cord (cutting a
Do not work materials containing asbestos (asbestos
wear a dust mask and work with a dust
extraction device when connectable
work with a dust extraction device when
connectable
sanding belts
making any adjustment or changing any accessory
USE
! before the sanding surface reaches the
workpiece, you should switch on the tool
! before switching off the tool, you should lift it
from the workpiece
- pull trigger A 2
- press knob B 2
- release the trigger
then releasing it
! disconnect the plug
pointing in same direction as arrow D on tool
! change sanding belts in time
! never fold sanding belts
- keeps belt centered while sanding
- switch on the tool
- adjust screw E 2 till the sanding belt is running in line
5
cleaner adaptor H as illustrated (1215
! do not use dustbox/dustbag/vacuum cleaner
when sanding metal
6
wear a dust mask and
2
2 and
4