Switch Off; Troubleshooting; Cleaning And Maintenance; Cleaning The Glass - Lotus PCI-94ET Guia Para La Intalación E Instrucciones De Uso

· Turn the knob/potentiometer in a clockwise or anticlockwise direction until it is in the rest position [ OFF ]
· Certain parts of the generator are still powered even when the cooker is switched off. Therefore, if carrying out
maintenance work, disconnect the appliance from the power supply first.
· Make sure that no liquid penetrates the induction generator, either during normal use or during cleaning and
maintenance of the component .
· CAUTION: NEVER carry out any work on the induction generators without first having disconnected them from the
power supply .
· HAZARD: high voltage present in induction generators powered by the electricity supply .
· The induction generators should only be opened by QUALIFIED, AUTHORISED PERSONNEL IN COMPLIANCE
WITH INTERNATIONAL, NATIONAL AND REGIONAL
SAFETY LAWS AND REGULATIONS.
Caution: During cleaning, do not wash the external parts of the appliance with direct or high pressure water jets.
Every evening, after use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the
perfect functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The steel parts must be washed with hot water and
neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent. They should then be dried with a
dry cloth. Do not use abrasive or corrosive detergents.

Cleaning the glass

The glass should be washed with vinegar or lemon-based degreasers, suitable for cleaning ceramics and glass.
During this operation, it is best for the glass not to be completely cold, so that spilt food, burnt fat and other substances
can be softened with a damp cloth and removed whilst still warm with a scraper, so as to prevent the glass surface from
deteriorating.
Do not use abrasive or corrosive detergents.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT GOING TO BE USED FOR
Clean and dry the appliance carefully according to the instructions. Disconnect the power supply.

PROCEDURE TO FOLLOW IN THE EVENT OF A BREAKDOWN

In the event of breakdown, turn off the appliance, disconnect the power supply by using the device situated above the
appliance and notify the after sales service.
Based on the manner in which the green light flashes, the induction hob notifies you what kind of problem is occurring.
The following is an explanation of what the various flashing lights stand for and how to resolve the related problems.
Type of fault
No heating
Green LED off, red LED off.
Green LED on, red LED off.
Green LED flashing, red LED off.
.
No heating
GB

SWITCH OFF

8. TROUBLESHOOTING.

CLEANING AND MAINTENANCE

SOME TIME
Possible cause
No power.
Make sure you have turned the knob
in a clockwise direction. .
Make sure you have positioned
the saucepan correctly
Defect control form.
33
IE
Check that the generator
is connected to the power supply.
Turn the knob
Position
a suitable saucepan
correctly.
Call a technician.
Steps to be take
n