How to use
Note
The appliance will not operate with the AC adaptor connected.
• The appliance may not operate in an ambient temperature
lower than approximately 0 °C.
Remove the cap, mount the desired head and press the
power switch.
▪ Clean the appliance after use.
How to clean
• Make sure that the main body is turned off.
• The AC adapter cannot be washed with water. Disconnect
the adaptor and wipe with a dry cloth.
• Do not wipe with thinner, benzine, alcohol etc. Doing so may
cause malfunction, cracking or discoloring of the parts.
• After cleaning, store the main body with the cap attached.
1
Remove the AC adaptor and head from the main body.
2
Rinse the main body with running water. (Fig. 3)
▪ Do not immerse the main body in water for a long time.
Otherwise, the water may seep into the main body.
3
Shake up and down several times to remove the water.
▪ Be careful not to hit the appliance on the sink or any other
object while draining the water.
4
Wipe off the water with a dry cloth and dry it well.
10
Troubleshooting
Problem
Appliance does not operate
even after charging.
Operating time is short
even after a full charge.
The main body cannot
be charged.
If the problems still cannot be solved, contact your dealer or a
service centre authorized by Panasonic for repair.
Action
The appliance will not operate
with the AC adaptor connected.
Please use the appliance after it
has been sufficiently charged and
the AC adaptor disconnected.
Use the appliance in an
ambient temperature
approximately 0 °C or higher.
Charge the battery for
approximately 8 hours
continuously to rejuvenate it.
If few uses remain even after
charging, the battery has
reached the end of its life.
(Fluid may be leaking due to
degradation at the end of
battery life.)
The battery is nearing the end
of its life.
The charging time may change
or battery performance
decrease outside of the
recommended temperature.
Charge within the
recommended charging
temperature of 0 °C to 35 °C.