Publicidad
Idiomas disponibles
Idiomas disponibles
ATTENTION
All scrapping operations
must occur with the ma-
chine stopped and cold and
the electrical power supply
disconnected.
Work on the electrical
equipment must only be
carried out by a qualified
electrician, with the power
supply disconnected.
ATTENTION
To carry out these opera-
tions, appropriate PPE must
be used.
During disassembly and
handling of the various
parts, the minimum height
from the floor must be
maintained.
Machine disposal
ATTENTION
Dismantling operations
must be carried out by quali-
fied personnel.
ATTENTION
Work on the electrical
equipment must only be
carried out by a qualified
electrician, with the power
supply disconnected.
Waste storage
At the end of the product's life-cycle, make sure it is not dis-
persed in the environment.
The door
scrapping the appliance.
Special waste materials can be stored temporarily while await-
ing treatment for disposal and/or permanent storage.
In any case, the current environmental protection laws in the
user's country must be observed.
40
must be removed before
Procedure regarding appliance dismantling macro
operations
Before disposing of the machine, make sure to carefully check
its physical condition, and in particular any parts of the struc-
ture that can give or break during scrapping.
The machine's parts must be disposed of in a differentiated
way, according to their different characteristics (e.g. metals,
oils, greases, plastic, rubber, etc.).
Different regulations are in force in the various countries, there-
fore comply with the provisions of the laws and competent
bodies in the country where scrapping takes place.
In general, the appliance must be taken to a specialised col-
lection/scrapping centre.
Dismantle the appliance, grouping the components according
to their chemical characteristics, remembering that the com-
pressor contains lubricant oil and refrigerant fluid which can
be recycled, and that the refrigerator components are special
waste assimilable with urban waste.
The symbol on the product indicates that this product
should not be treated as domestic waste, but must be
correctly disposed of in order to prevent any negative
consequences for the environment and human health.
For further information on the recycling of this product,
contact the local dealer or agent, the after-sales service
or the local body responsible for waste disposal.
ATTENTION
Make the appliance unus-
able by removing the power
cable and any compartment
closing devices, to prevent
the possibility of someone
becoming trapped inside.
NOTE
When scrapping the machine, the "CE" mark-
ing, this manual and other documents con-
cerning the appliance must be destroyed.
Publicidad
