Publicidad
Idiomas disponibles
Idiomas disponibles
Reversing the opening direction of the doors
• Make sure the appliance is unplugged and empty.
• To remove the door, you first need to tilt the appliance backwards. Lean the appliance against
a hard surface to prevent it from slipping during the operation.
• All the parts removed must be kept to refit the door.
• Do not lay the appliance down on the floor as this may damage the cooling system.
• Ideally, the appliance should be handled by 2 people during the operation.
Before reversing the door opening direction, prepare the following tools and equipment: flat
screwdriver, cross screwdriver, key and elements included in the accessories bag:
Required tools: Flat screwdriver, cross screwdriver, flat key.
19.
Lift up and remove the hinge cover, remove the three screws holding the top hinge onto the
door, and remove the hinge
20.
Remove the door from the fridge compartment of the refrigerator.
21.
Remove the two screws holding the central hinge.
22.
Remove the door from the freezer compartment.
23.
Remove the screws holding the bottom hinge on the right-hand side of the refrigerator, then
remove the hinge.
24.
Remove the washer and nut holding the shaft rod into the right-hand hole for the bottom hinge,
then remove the shaft.
25.
Insert the shaft rod into the left-hand hole for the bottom hinge, then fix the shaft with the washer
and nut.
26.
Install the hinge onto the left-hand side of the refrigerator.
27.
Remove the screw holding the door stopper on the bottom right-hand corner of the freezer
compartment door, then remove the door stopper and install it on the bottom left-hand side.
Publicidad
