Muskoka Harmony MM2502E Instrucciones De Montaje página 4

All manuals and user guides at all-guides.com
Take your electric firebox out of its packaging and position it between the 2
legs of the mantel. Once you are close to the wall, plug the firebox into the
nearest outlet.
The firebox comes with 3 metal brackets and 20 black screws. These metal
brackets must be attached to both the sides of the firebox and the mantel
to ensure that your firebox does not move around as you use it. 2 of the
brackets have 2 large holes on one side. These large holes line up with
2 screws on the side of the firebox. The other screws provided must be
inserted into the holes at the other end of the bracket and into the firebox.
The other side of each bracket attaches to the mantel.
The 3rd bracket has no holes on 1 side. That side should go up against the
firebox top but should not be attached as the heater sits right underneath
the bracket. Only the mantel side should be attached.
If you have any questions about the firebox please reference the installation
instructions that come with the firebox. Please reference the Quick Tips
section of that instruction manual.
noTE: some fireboxes come with pre-attached trims
You are now ready to position your mantel against the wall.
This step requires 2 people to move the unit.
Anti-tipping device
At this point you must attach the anti-tipping device to your mantel and your wall. This device is a safety feature that will
prevent your mantel from tipping over if a weight is applied which can unbalance the unit.
3