To Stop Recording Temporarily; To Stop Recording; One-Touch Recording (Otr) - memorex MVD4544 Guia Del Usuario

TO STOP RECORDING TEMPORARILY

1
Press the PLAY/PAUSE ®P button to avoid recording
unwanted material. Press the PLAY/PAUSE ®P button
again to continue recording. The Pause mode will be
released after 5 minutes to prevent damage to the tape, the
unit will then be in the Stop mode.
ONE-TOUCH RECORDING
OTR is a simple and convenient way to make a timed recording without programming the Timer.
1
Press the POWER button to turn on the unit and load a
tape with the Erase Prevention Tab intact.
3
2
1
Press the AV1 1 or AV2 2 button to select the desired input
source to record (AV1 (rear A/V jacks) or AV2 (front A/V
jacks). Press the REC button 3 once to start recording. Press
it again to activate OTR (One-Touch Recording); "OTR" will
appear on the screen and "0:30" and the OTR logo "
appear on the display. The unit will record for 30 minutes and
then it will stop and turn off to the Standby mode.
NOTES:
• If the tape's available recording time is shorter that the OTR time that you set, when the end of the tape is reached, the
recording will stop and the tape will be ejected and the unit will turn off to the standby mode automatically.
• If the Erase Prevention Tab is removed, the tape will eject when the REC button is pressed.
All manuals and user guides at all-guides.com
VCR OPERATION (CONTINUED)
1
3
3
"will

TO STOP RECORDING

1
To stop recording, press the STOP X button.
2
Press the SP/SLP button to select the desired tape speed.
See page 29 for more information on tape usage.
4
Within a few seconds, press the REC button to increase
the recording time by 30 minutes. Each additional press of
the REC button will increase recording time by 30 minutes,
up to a maximum of eight hours. To cancel OTR, press the
REC button repeatedly until the OTR logo "
disappears on the display. To stop OTR, press and hold the
STOP button until "STOP" appears in the display.
34
"