Performance - Fluke Networks AirCheck Guía De Funcionamiento Básico

AirCheck Getting Started Guide
Minimum Configuration for the Best

Performance

To change the language and country settings
Select Tools.
1
To change the language for the screens, select Set
2
language. Highlight a language, then press
Save.
To change the country, select Set country, select
3
the country where you will use the tester, then press

Save.
To get the best performance from your tester, use
AirCheck Manager software to configure a profile and
™
upload it to the tester. A profile can also be configured
on the AirCheck tester and contains data that lets the
tester do these tasks:

Connect to networks that require security
credentials.

Show the correct authorization status for each
access point. This lets you quickly see which access
points are authorized parts of the network.

Ping key network devices.

Run a TCP Port Connect Test, using a hostname or
an IP address and a designated port number.
12
