Fluke Networks AirCheck Guía De Funcionamiento Básico página 31

Discover Channels, Networks, APs, or Clients
O
Press
that come into range are added to the top of the
list. Networks that become out of range become
gray if Gray inaudible access points is enabled.

ACL: The authorization status of the access point.
The default status is
changed to
each access point to show how it is related to your
network. To change the status, select Access
Points from the home screen, select an access
point, then press
(...): All access points in the network do not have
the same authorization status.

: The maximum signal strength of all the
access points for a network SSID.
Signal to noise level is a measure of signal

SNR:
strength relative to noise. The ratio is
measured in decibels (dB).

: The security status of the network:
Red open lock: The network does not have
security enabled.
Some networks with an open lock will allow
you to connect the tester and perform
measurements including running the Ping test,
but may not allow a PC connecting to the same
network to connect to the web without a user
ID and password.
, then move through an area. Networks
Authorized. Change the status of

Unknown, but can be
ACL.
Note
25