Cleaning And Maintenance - MSW Motor Technics MSW-TCT-01 Manual De Instrucciones

F. Holding the tire separator lever by the handle, lower the tire separator
over the side of the tire, just inside the rim flange (see following picture)
and fix it there on the lever.
G. Press the tire separator against the side of the tire at the rim flange until
you hear a knocking sound, i.e. the tire bead comes away from the rim
flange. Repeat this process in several places until the tire is completely
detached from the rim on that side.
H. Remove the wheel from the unit, rotate it and place the other side on the
unit - repeat the operation.
I. When the tire is unstuck from the rim edge on both sides, you can use
additional tools, e.g. spoons, to remove the tire from the rim by levering
its foot above the rim edge.
3.4.

Cleaning and maintenance

a) Use only non-corrosive cleaning agents for cleaning the surfaces.
b) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
c) Do not spray the unit with a stream of water or immerse it in water.
d) Use a soft, damp cloth for cleaning.
e) Do not use sharp and/or metal objects (e.g. a wire brush or metal spatula) for
cleaning, as these may damage the surface of the material from which the unit
is made.
f) Do not clean the unit with acidic substances, medical products, thinners, fuel,
oil or other chemicals as this may damage the unit.