Publicidad
Idiomas disponibles
Idiomas disponibles
10 – control tank
11 – suction probe
12 – handle
13 – drain valve of the control tank
14 – compressed air connection to empty the drain tank
15 – safety valves
16 – drain valve of the drain tank
17 – castors
18 – drain tank
19 – suction hose valve (not visible in the photograph - it is located at the hose
end)
3.2. Preparation for work
LOCATION OF THE DEVICE
The ambient temperature should not exceed 45°C and the relative humidity should
not exceed 85%. Use the device only in well-ventilated places. Do not block the air
outlet of the device. Keep the device away from any hot surfaces. Always operate
the device on a level, stable, clean, fireproof and dry surface and out of the reach of
children and persons with reduced mental, sensory and intellectual abilities. The
working area should have immediate access to the compressed air shut-off valve.
Ensure that the pressure of the air supplying the device does not exceed the
recommended range.
3.3. Assembly of the device
1. Turn the drain tank to horizontal position.
2. Screw the control tank on the drain tank [1]
Publicidad
