Set The Clock Manually - Explore Scientific WSH4103 Manual De Instrucciones

SET THE CLOCK MANUALLY

This console is designed to obtain the time by
synchronizing with your local time from the APP. It
will synchronize the time and weather information
everyday. If you want to use it offline, you can set the
time and date manually.
1. Press and hold [ TIME ] button to enter into time
and date setting.
2. The setting parameter will flash.
3. Press [ + ] button once, the figure will increase 1
unit. Press and hold the [ + ] button, the figures will
increase rapidly.
4. Press [ - ] button once, the figure will decrease 1
unit. Press and hold the [ - ] button, the figures will
decrease rapidly.
5. Press [ TIME ] button to confirm setting and enter to
next parameter.
6. Sequence of setting:
12/24h format  Hour  Minute  Year  Date
format (D M / M D)  Month  Day  Language 
 Pressure unit  Temperature unit (°C/°F)  Exit
7. If there is no action in 20 seconds, the setting will be
saved and you will exit the setting mode.
12
ALARM
SETTING/ADJUSTING ALARM TIME
1. Press [ AL SET ] to display alarm time. Press and
hold [ AL SET ] to enter alarm setting mode.
2. The setting parameter will flash.
3. Press [ + ] or [ - ] button to set the desired data.
4. Press [ AL SET ] button to confirm setting and exit.
5.The alarm will sound when the alarm setting is
finished and turned on.
TURN ON/OFF ALARM
Press the [ AL ON/OFF ] button to turn on/off the
alarm.
OPERATION
1. At the set alarm time, alarm signal rings.
2. During the alarm, press the [ LIGHT/SNOOZE ]
button to delay the alarm by 5 minutes.
3. If you do not press any button to stop the alarm, it
will automatically turn off after 2 minutes.
4. To stop the alarm, press any other button, except
for [ LIGHT/SNOOZE ].
5. The alarm will start again at the next alarm time,
unless you switch off the alarm function by