Technical Data; Eu Declaration Of Conformity - Chicago Pneumatic CP873C-HD Operation Manual

Safety Information

Technical Data

Tool Data
Free
speed
(rpm)
CP873C-HD
3500
CP873C-HDES
3500
Maximum working pressure
6.3 bar / 90 psig
Declarations

EU DECLARATION OF CONFORMITY

We, CHICAGO PNEUMATIC Tool Co.LLC
1815 Clubhouse Road, Rock Hill, SC 29730 - USA, declare
under our sole responsibility that the product (with name,
type and serial number, see front page) is in conformity with
the following Directive(s):
Harmonized standards applied: EN ISO 11148-9: 2011
Authorities can request relevant technical information from:
Pascal Roussy, R&D Manager, Ets Georges Renault, 38 rue
Bobby Sands, BP10273 44818 Saint Herblain, France
Saint-Herblain, 2022/03/01
Pascal ROUSSY
Signature of issuer
UK Declaration of Conformity
We CHICAGO PNEUMATIC Tool Co.LLC
1815 Clubhouse Road, Rock Hill, SC 29730 -
USA, declare under our sole responsibility that
the product (with name, type and serial number,
see front page) is in conformity with the follow-
ing UK Regulation(s):
Supply of Machinery (Safety) Regulations 2008
Designated Standards applied:
EN ISO 11148-9: 2011
Saint-Herblain, 2022/03/01
Pascal ROUSSY
Signature of issuer
Authorities can request relevant technical information from:
6
Air Inlet Weight Weight
(") (kg) (lb)
1/4 NPT 1.05 2.31
1/4 NPT 1.16 2.56
© Chicago Pneumatic - 8940177136
UK Authorized Representative:
Air Compressors & Tools Ltd
Zodiac – Unit 4, Boundary way
Hemel Hempstead Industrial Estate, HP27SJ Hempstead
Hertfordshire – UK
Contact: M.Taylor
Noise and Vibration
These declared values were obtained by laboratory type test-
ing in accordance with the stated standards and are suitable
for comparison with the declared values of other tools tested
in accordance with the same standards. These declared val-
ues are not adequate for use in risk assessments and values
measured in individual work places may be higher. The ac-
tual exposure values and risk of harm experienced by an indi-
vidual user are unique and depend upon the way the user
works, the workpiece and the workstation design, as well
upon the exposure time and the physical condition of the
user.
We, CHICAGO PNEUMATIC Tool Co.LLC, cannot be
held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individ-
ual risk assessment in a work place situation over which we
have no control.
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed. An EU guide to managing hand-
arm vibration can be found by accessing
www.pneurop.eu/index.php
lation'.
We recommend a programme of health surveillance to detect
early symptoms which may relate to noise or vibration expo-
sure, so that management procedures can be modified to help
prevent future impairment.
If this equipment is intended for fixtured applications:
The noise emission is given as a guide to the machine-
builder. Noise and vibration emission data for the com-
plete machine should be given in the instruction manual
for the machine.
Regional Requirements
WARNING
This product can expose you to chemicals including
lead, which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For
more information go to
https://www.p65warnings.ca.gov/
Safety
DO NOT DISCARD - GIVE TO USER
Tire Buffer
http://
and selecting 'Tools' then 'Legis-