Publicidad
Idiomas disponibles
Idiomas disponibles
2. Switching the device off
3. Changing temperature unit
In order to change the temperature unit between °C and °F hold
the value increasing button
4. Dew point measurement mode
Press the
measurement of ambient temperature and dew point.
5. Date format selection
Press the
current time.
6. Data value preview mode
Press the
measurement value (information on the type of value displayed is
present in the top section of the screen, point 26 from the screen
description), and the set value of upper and lower limit. In the
value preview mode a magnifying glass symbol appears on the
screen. To return to the basic mode, press one of the following
buttons:
automatically to the basic screen.
7. Deleting stats
Hold the
maximum and average value of measurements). MAX/MIN/AVG
on the screen should be flashing.
8. Sound alarm
The device makes a sound signal when a set limit value is
exceeded. Press one of the buttons on the device to cancel the
alarm.
9. Deleting exceeded set value limit alert
When the device is switched off, it can be switched on by
button (5) for approx. 3s.
pressing the
In order to switch the device off, keep pressing the
button (5) (the device must remain in the basic mode),
until "off" is displayed on the screen. The device is
switched off.
When the device is in battery power supply mode, it will
switch off automatically when low battery level is
reached.
The device will switch off automatically after the
permissible ambient temperature is exceeded.
for about 2s.
button to alternate between displayed the
button to alternate between year, month, day and
button to see the maximum, minimum and averaged
or
. After 15 s of inactivity the device returns
button for 2s to reset measurement stats (minimum,
Publicidad
